| CaracterĂsticas de hardware |
| Interface |
| • 8× puertos rj45 de 2.5 gbps |
| • 2× ranuras sfp+ de 10g |
| • 1× puerto de consola rj45 |
| • 1× puerto de consola micro-usb |
| Cantidad de ventiladores |
| Diseño sin ventilador |
| Fuente de alimentaciĂłn |
| 100-240 v ca~50/60 hz |
| Dimensiones (w x d x h) |
| 11,6 Ă— 7,1 Ă— 1,7 pulgadas (294 Ă— 180 Ă— 44 mm) |
| Montaje |
| Montaje en rack/ sobremesa |
| Consumo máximo de energĂa |
| 15.0 w (110v/60hz) |
| Disipación máxima de calor |
| 51.18 btu/h (110 v/60 hz) |
| Rendimiento |
| Capacidad de switcheo |
| 80 gbps |
| Tasa de reenvĂo de paquetes |
| 59.52 mpps |
| Tabla de mac address |
| 16 k |
| Paquetes de memoria de bĂşfer |
| 12 mbit |
| Jumbo frame |
| 9 kb |
| CaracterĂsticas de software |
| Calidad de servicio |
| – 8 colas de prioridad |
| – prioridad 802.1p cos/dscp |
| – programación de colas |
| – sp (prioridad estricta) |
| – wrr (round robin ponderado) |
| – sp+wrr |
| – control de ancho de banda |
| – limitación de clasificación basada en puerto/flujo |
| – rendimiento más suave |
| – acción para flujos |
| – reflejo (a interfaz soportada) |
| – redirección (a interfaz compatible) |
| – lĂmite de velocidad |
| – observación qos |
| L3 features |
| • 32 ipv4/ipv6 interfaces |
| • static routing |
| – 48 static routes |
| • static arp |
| – 128 static entries |
| • proxy arp |
| • gratuitous arp |
| • dhcp server |
| • dhcp relay |
| – dhcp interface relay |
| – dhcp vlan relay |
| • dhcp l2 relay |
| CaracterĂsticas de l2 y l2 + |
| • link aggregation |
| – static link aggregation |
| – 802.3ad lacp |
| – up to 8 aggregation groups, containing 8 ports per group |
| • spanning tree protocol |
| – 802.1d stp |
| – 802.1w rstp |
| – 802.1s mstp |
| – stp security: tc protect, bpdu filter, root protect |
| • loopback detection |
| – port based |
| – vlan based |
| • flow control |
| – 802.3x flow control |
| – hol blocking prevention |
| • mirroring |
| – port mirroring |
| – cpu mirroring |
| – one-to-one |
| – many-to-one |
| – tx/rx/both |
| L2 multicast |
| • igmp snooping |
| – igmp v1/v2/v3 snooping |
| – fast leave |
| – igmp snooping querier |
| – igmp authentication |
| • igmp authentication |
| • mld snooping |
| – mld v1/v2 snooping |
| – fast leave |
| – mld snooping querier |
| – static group config |
| – limited ip multicast |
| • mvr |
| • multicast filtering: 256 perfiles y 16 entradas por perfil |
| CaracterĂsticas avanzadas |
| – detección automática de dispositivos |
| – configuración por lotes |
| – actualización de firmware por lotes |
| – supervisión inteligente de la red |
| – avisos de eventos anormales |
| – configuración unificada |
| – programación de reinicios |
| Vlan |
| • vlan group |
| – max 4k vlan groups |
| • 802.1q tagged vlan |
| • mac vlan: 256 entries |
| • protocol vlan: protocol template 16, protocol vlan 16 |
| • gvrp |
| • vlan vpn (qinq) |
| – port-based qinq |
| – selective qinq |
| • voice vlan |
| Lista de control de acceso |
| • time-based acl |
| • mac acl |
| – source mac |
| – destination mac |
| – vlan id |
| – user priority |
| – ether type |
| • ip acl |
| -source ip |
| – destination ip |
| – fragment |
| – ip protocol |
| – tcp flag |
| – tcp/udp port |
| – dscp/ip tos |
| – user priority |
| • combined acl |
| • packet content acl |
| • ipv6 acl |
| • policy |
| – mirroring |
| – redirect |
| – rate limit |
| – qos remark |
| • acl apply to port/vlan |
| Seguridad |
| • ip-mac-port binding |
| – 512 entries |
| – dhcp snooping |
| – arp inspection |
| – ipv4 source guard: 100 entries |
| • ipv6-mac-port binding |
| – 512 entries |
| – dhcpv6 snooping |
| – nd detection |
| – ipv6 source guard: 100 entries |
| • dos defend |
| • static/dynamic port security |
| – up to 64 mac addresses per port |
| • broadcast/multicast/unicast storm control |
| – kbps/ratio control mode |
| • 802.1x |
| – port base authentication |
| – mac base authentication |
| – vlan assignment |
| – mab |
| – guest vlan |
| – support radius authentication andaccountability |
| • aaa (including tacacs+) |
| • port isolation |
| • secure web management through https with sslv3/tls 1.2 |
| • secure command line interface (cli) management with sshv1/sshv2 |
| • ip/port/mac based access control |
| Ipv6 |
| • ipv6 dual ipv4/ipv6 |
| • multicast listener discovery (mld) snooping |
| • ipv6 acl |
| • ipv6 interface |
| • static ipv6 routing |
| • ipv6 neighbor discovery (nd) |
| • path maximum transmission unit (mtu) discovery |
| • internet control message protocol (icmp) version 6 |
| • tcpv6/udpv6 |
| • ipv6 applications |
| – dhcpv6 client |
| – ping6 |
| – tracert6 |
| – telnet (v6) |
| – ipv6 snmp |
| – ipv6 ssh |
| – ipv6 ssl |
| – http/https |
| – ipv6 tftp |
| Mibs |
| • mib ii (rfc1213) |
| • interface mib (rfc2233) |
| • ethernet interface mib (rfc1643) |
| • bridge mib (rfc1493) |
| • p/q-bridge mib (rfc2674) |
| • rmon mib (rfc2819) |
| • rmon2 mib (rfc2021) |
| • radius accounting client mib (rfc2620) |
| • radius authentication client mib (rfc2618) |
| • remote ping, traceroute mib (rfc2925) |
| • support tp-link private mib |
| AdministraciĂłn |
| Omada app |
| SĂ. requiere el uso de oc300, oc200, omada cloud-based controller u omada software controller. |
| Centralized management |
| – controlador omada basado en la nube |
| – controlador de hardware omada (oc300) |
| – controlador de hardware omada (oc200) |
| – controlador de software omada |
| Cloud access |
| SĂ. requiere el uso de oc300, oc200, omada cloud-based controller u omada software controller. |
| Zero-touch provisioning |
| SĂ. requiere el uso de omada cloud-based controller. |
| Management features |
| • interfaz gráfica basada en web |
| • interfaz de lĂnea de comandos (cli) a travĂ©s del puerto de consola y telnet |
| • snmp v1/v2c/v3 |
| Trap/informes |
| Grupos rmon (1, 2, 3, 9) |
| • plantilla sdm |
| • cliente dhcp/bootp |
| • lldp/lldp-med 802.1ab |
| • instalación automática de dhcp |
| • imagen dual, configuración dual |
| • monitorización de la cpu |
| • diagnóstico de cable |
| • eee (energy efficient ethernet) |
| • recuperación de contraseña |
| • sntp (simple network time protocol) |
| • registro del sistema |
| Otros |
| Certificacion |
| Ce, fcc, rohs |
| Contenidos del paquete |
| – switch g3210x-m2 |
| – cable de alimentación |
| – guĂa de instalaciĂłn rápida |
| – kit de montaje en bastidor |
| – pies de goma |
| Requisitos del sistema |
| Microsoft® windows® 98se, nt, 2000, xp, vista™ or windows 7/8/10/11, mac® os, netware®, unix® or linux. |
| Ambiente |
| – temperatura de funcionamiento: 0-50 and #8451; (32-122 and #8457;); |
| – temperatura de almacenamiento: -40-70 and #8451; (-40-158 and #8457;) |
| – humedad de funcionamiento: 10-90% hr sin condensación. |
| – humedad de almacenamiento: 5-90% hr sin condensación. |
Valoraciones
No hay valoraciones aĂşn.