Características de hardware |
Interface 4× 100/1000/2500/5000/10000 mbps rj45 ports |
2× 10g sfp+ slots |
1× rj45 console port |
1× micro-usb console port |
Cantidad de ventiladores 2 |
Fuente de alimentación 100-240 v ac~50/60 hz |
Puertos poe (rj45) standard: 802.3bt/at/af compliant |
poe+ ports: 4 ports, up to 60 w per port |
power budget: 200 w |
Dimensiones (w x d x h) 11.6 × 7.1 × 1.7 in (294× 180 × 44 mm) |
Montaje rack mountable |
desktop |
Consumo máximo de energía 27.29 w (110v/60hz) (no pd connected) |
244.90 w (110v/60hz) (with 200 w pd connected) |
Disipación máxima de calor 93.12 btu/h (110 v/60 hz) (no pd connected) |
835.67 btu/h (110 v/60 hz) (with 200 w pd connected) |
Rendimiento |
Capacidad de switcheo 120 gbps |
Tasa de reenvío de paquetes 89.28 mpps |
Tabla de mac address 32 k |
Jumbo frame 9 kb |
Características de software |
Calidad de servicio 8 priority queues |
802.1p cos/dscp priority |
queue scheduling |
– sp (strict priority) |
– wrr (weighted round robin) |
– sp+wrr |
bandwidth control |
– port/flow based rating limiting |
smoother performance |
action for flows |
– mirror (to supported interface) |
– redirect (to supported interface) |
– rate limit |
– qos remark |
Características de l2 y l2 + link aggregation |
– static link aggregation |
– 802.3ad lacp |
– up to 8 aggregation groups, containing 8 ports per group |
spanning tree protocol |
– 802.1d stp |
– 802.1w rstp |
– 802.1s mstp |
– stp security: tc protect, bpdu filter, root protect |
loopback detection |
– port based |
– vlan based |
flow control |
– 802.3x flow control |
– hol blocking prevention |
mirroring |
– port mirroring |
– cpu mirroring |
– one-to-one |
– many-to-one |
– tx/rx/both |
L2 multicast igmp snooping |
– igmp v1/v2/v3 snooping |
– fast leave |
– igmp snooping querier |
– igmp authentication |
igmp authentication |
mld snooping |
– mld v1/v2 snooping |
– fast leave |
– mld snooping querier |
– static group config |
– limited ip multicast |
mvr |
multicast filtering: 256 profiles and 16 entries per profile |
Vlan vlan group |
– max 4k vlan groups |
802.1q tagged vlan |
mac vlan: 10 entries |
protocol vlan: protocol template 16, protocol vlan 16 |
private vlan |
gvrp |
vlan vpn (qinq) |
– port-based qinq |
– selective qinq |
voice vlan |
Lista de control de acceso time-based acl |
mac acl |
– source mac |
– destination mac |
– vlan id |
– user priority |
– ether type |
ip acl |
-source ip |
– destination ip |
– fragment |
– ip protocol |
– tcp flag |
– tcp/udp port |
– dscp/ip tos |
– user priority |
combined acl |
packet content acl |
ipv6 acl |
policy |
– mirroring |
– redirect |
– rate limit |
– qos remark |
acl apply to port/vlan |
Seguridad ip-mac-port binding |
– 512 entries |
– dhcp snooping |
– arp inspection |
– ipv4 source guard: 100 entries |
ipv6-mac-port binding |
– 512 entries |
– dhcpv6 snooping |
– nd detection |
– ipv6 source guard: 100 entries |
dos defend |
static/dynamic port security |
– up to 64 mac addresses per port |
broadcast/multicast/unicast storm control |
– kbps/ratio control mode |
802.1x |
– port base authentication |
– mac base authentication |
– vlan assignment |
– mab |
– guest vlan |
– support radius authentication andaccountability |
aaa (including tacacs+) |
port isolation |
secure web management through https with sslv3/tls 1.2 |
secure command line interface (cli) management with sshv1/sshv2 |
ip/port/mac based access control |
Ipv6 ipv6 dual ipv4/ipv6 |
multicast listener discovery (mld) snooping |
ipv6 acl |
ipv6 interface |
static ipv6 routing |
ipv6 neighbor discovery (nd) |
path maximum transmission unit (mtu) discovery |
internet control message protocol (icmp) version 6 |
tcpv6/udpv6 |
ipv6 applications |
– dhcpv6 client |
– ping6 |
– tracert6 |
– telnet (v6) |
– ipv6 snmp |
– ipv6 ssh |
– ipv6 ssl |
– http/https |
– ipv6 tftp |
L3 features 16 ipv4/ipv6 interfaces |
static routing |
– 48 static routes |
static arp |
– 128 static entries |
proxy arp |
gratuitous arp |
dhcp server |
dhcp relay |
– dhcp interface relay |
– dhcp vlan relay |
dhcp l2 relay |
Características avanzadas automatic device discovery |
batch configuration |
batch firmware upgrading |
intelligent network monitoring |
abnormal event warnings |
unified configuration |
reboot schedule |
Mibs mib ii (rfc1213) |
interface mib (rfc2233) |
ethernet interface mib (rfc1643) |
bridge mib (rfc1493) |
p/q-bridge mib (rfc2674) |
rmon mib (rfc2819) |
rmon2 mib (rfc2021) |
radius accounting client mib (rfc2620) |
radius authentication client mib (rfc2618) |
remote ping, traceroute mib (rfc2925) |
support tp-link private mib |
Administración |
Omada app yes. requiring the use of oc300, oc200, omada cloud-based controller, or omada software controller. |
Centralized management omada cloud-based controller |
omada hardware controller (oc300) |
omada hardware controller (oc200) |
omada software controller |
Cloud access yes. requiring the use of oc300, oc200, omada cloud-based controller, or omada software controller. |
Zero-touch provisioning yes. requiring the use of omada cloud-based controller. |
Management features web-based gui |
command line interface (cli) through the console port, telnet |
snmp v1/v2c/v3 |
– trap/inform |
– rmon (1,2,3,9 groups) |
sdm template |
dhcp/bootp client |
802.1ab lldp/lldp-med |
dhcp autoinstall |
dual image, dual configuration |
cpu monitoring |
cable diagnostics |
eee |
password recovery |
sntp |
system log |
Otros |
Certificacion ce, fcc, rohs |
Contenidos del paquete tl-sx3206hpp switch |
power cord |
quick installation guide |
rackmount kit |
rubber feet |
Requisitos del sistema microsoft® windows® 98se, nt, 2000, xp, vista or windows 7/8/10/11, mac® os, netware®, unix® or linux. |
Ambiente operating temperature: 050 and #8451; (32122 and #8457;); |
storage temperature: -4070 and #8451; (-40158 and #8457;) |
operating humidity: 1090% rh non-condensing |
storage humidity: 590% rh non-condensing |
Valoraciones
No hay valoraciones aún.