| Características de hardware |
| Interfaz |
| 16× puertos rj45 de 2.5 gbps |
| 2× ranuras sfp+ de 10g |
| 1× puerto de consola rj45 |
| 1× puerto de consola micro-usb |
| Cantidad de ventiladores |
| 2 |
| Fuente de alimentación |
| 100-240 v ca~50/60 hz |
| Puertos poe (rj45) |
| – estándar: compatible con 802.3at/af |
| – puertos poe+ (poe 802.3at): 8 puertos, hasta 30 w por puerto |
| – potencia de energía: 240 w |
| Dimensiones |
| 17,3 × 7,1 × 1,7 pulgadas (440 × 180 × 44 mm) |
| Montaje |
| Montaje en rack |
| Consumo de potencia máximo |
| 299,4 w (110 v/60 hz) (con una pd de 240 w conectada) |
| Disipación máxima de calor |
| 1021,64 btu/h (110 v/60 hz) (con 240 w pd conectada) |
| Rendimiento |
| Capacidad de conmutación |
| 120 gbps |
| Tasa de reenvío de paquetes |
| 89.28 mpps |
| Tabla de direcciones mac |
| 16 k |
| Memoria del buffer de paquete |
| 12 mbit |
| Jumbo frame |
| 9 kb |
| Características de software |
| Calidad de servicio |
| – 8 colas de prioridad |
| – prioridad 802.1p cos/dscp |
| – programación de colas |
| – sp (prioridad estricta) |
| – wrr (round robin ponderado) |
| – sp+wrr |
| – control de ancho de banda |
| – limitación de clasificación basada en puerto/flujo |
| – rendimiento más suave |
| – acción para flujos |
| – reflejo (a interfaz soportada) |
| – redirección (a interfaz compatible) |
| – límite de velocidad |
| – observación qos |
| Características l3 |
| 32 ipv4/ipv6 interfaces |
| static routing |
| – 48 static routes |
| static arp |
| – 128 static entries |
| proxy arp |
| gratuitous arp |
| dhcp server |
| dhcp relay |
| – dhcp interface relay |
| – dhcp vlan relay |
| dhcp l2 relay |
| Características l2 y l2+ |
| link aggregation |
| – static link aggregation |
| – 802.3ad lacp |
| – up to 8 aggregation groups, containing 8 ports per group |
| spanning tree protocol |
| – 802.1d stp |
| – 802.1w rstp |
| – 802.1s mstp |
| – stp security: tc protect, bpdu filter, root protect |
| loopback detection |
| – port based |
| – vlan based |
| flow control |
| – 802.3x flow control |
| – hol blocking prevention |
| mirroring |
| – port mirroring |
| – cpu mirroring |
| – one-to-one |
| – many-to-one |
| – tx/rx/both |
| Multicast l2 |
| igmp snooping |
| – igmp v1/v2/v3 snooping |
| – fast leave |
| – igmp snooping querier |
| – igmp authentication |
| igmp authentication |
| mld snooping |
| – mld v1/v2 snooping |
| – fast leave |
| – mld snooping querier |
| – static group config |
| – limited ip multicast |
| mvr |
| multicast filtering: 256 profiles and 16 entries per profile |
| Características avanzadas |
| automatic device discovery |
| batch configuration |
| batch firmware upgrading |
| intelligent network monitoring |
| abnormal event warnings |
| unified configuration |
| reboot schedule |
| Vlan |
| vlan group |
| – max 4k vlan groups |
| 802.1q tagged vlan |
| mac vlan: 256 entries |
| protocol vlan: protocol template 16, protocol vlan 16 |
| gvrp |
| vlan vpn (qinq) |
| – port-based qinq |
| – selective qinq |
| voice vlan |
| Lista de control de acceso |
| time-based acl |
| mac acl |
| – source mac |
| – destination mac |
| – vlan id |
| – user priority |
| – ether type |
| ip acl |
| -source ip |
| – destination ip |
| – fragment |
| – ip protocol |
| – tcp flag |
| – tcp/udp port |
| – dscp/ip tos |
| – user priority |
| combined acl |
| packet content acl |
| ipv6 acl |
| policy |
| – mirroring |
| – redirect |
| – rate limit |
| – qos remark |
| acl apply to port/vlan |
| Seguridad |
| ip-mac-port binding |
| – 512 entries |
| – dhcp snooping |
| – arp inspection |
| – ipv4 source guard: 100 entries |
| ipv6-mac-port binding |
| – 512 entries |
| – dhcpv6 snooping |
| – nd detection |
| – ipv6 source guard: 100 entries |
| dos defend |
| static/dynamic port security |
| – up to 64 mac addresses per port |
| broadcast/multicast/unicast storm control |
| – kbps/ratio control mode |
| 802.1x |
| – port base authentication |
| – mac base authentication |
| – vlan assignment |
| – mab |
| – guest vlan |
| – support radius authentication andaccountability |
| aaa (including tacacs+) |
| port isolation |
| secure web management through https with sslv3/tls 1.2 |
| secure command line interface (cli) management with sshv1/sshv2 |
| ip/port/mac based access control |
| Ipv6 |
| ipv6 dual ipv4/ipv6 |
| multicast listener discovery (mld) snooping |
| ipv6 acl |
| ipv6 interface |
| static ipv6 routing |
| ipv6 neighbor discovery (nd) |
| path maximum transmission unit (mtu) discovery |
| internet control message protocol (icmp) version 6 |
| tcpv6/udpv6 |
| ipv6 applications |
| – dhcpv6 client |
| – ping6 |
| – tracert6 |
| – telnet (v6) |
| – ipv6 snmp |
| – ipv6 ssh |
| – ipv6 ssl |
| – http/https |
| – ipv6 tftp |
| Mibs |
| mib ii (rfc1213) |
| interface mib (rfc2233) |
| ethernet interface mib (rfc1643) |
| bridge mib (rfc1493) |
| p/q-bridge mib (rfc2674) |
| rmon mib (rfc2819) |
| rmon2 mib (rfc2021) |
| radius accounting client mib (rfc2620) |
| radius authentication client mib (rfc2618) |
| remote ping, traceroute mib (rfc2925) |
| support tp-link private mib |
| Gestión |
| Omada app |
| Sí. requiere el uso de oc300, oc200, omada cloud-based controller u omada software controller. |
| Gestión centralizada |
| – controlador omada basado en la nube |
| – controlador de hardware omada (oc300) |
| – controlador de hardware omada (oc200) |
| – controlador de software omada |
| Acceso a la nube |
| Sí. requiere el uso de oc300, oc200, omada cloud-based controller u omada software controller. |
| Aprovisionamiento sin contacto |
| Sí. requiere el uso de omada cloud-based controller. |
| Funciones de gestión |
| – interfaz gráfica de usuario basada en web |
| interfaz de línea de comandos (cli) a través del puerto de consola, telnet |
| snmp v1/v2c/v3 |
| – trap/inform |
| – rmon (1,2,3,9 grupos) |
| sdm template |
| dhcp/bootp cliente |
| 802.1ab lldp/lldp-med |
| dhcp autoinstalación |
| dual image, dual configuración |
| monitorización de cpu |
| diagnostico de cables |
| eee |
| recuperación de contraseñas |
| sntp |
| registro del sistema |
| Otros |
| Certificaciones |
| Ce, fcc, rohs |
| Contenido del paquete |
| – interruptor sg3218xp-m2 |
| – cable de alimentación |
| – guía de instalación rápida |
| – kit de montaje en bastidor |
| – pies de goma |
| Requisitos del sistema |
| Microsoft® windows® 98se, nt, 2000, xp, vista or windows 7/8/10/11, mac® os, netware®, unix® or linux. |
| Factores ambientales |
| – temperatura de funcionamiento: 0-50 and #8451; (32-122 and #8457;); |
| – temperatura de almacenamiento: -40-70 and #8451; (-40-158 and #8457;) |
| – humedad de funcionamiento: 10-90% hr sin condensación. |
| – humedad de almacenamiento: 5-90% hr sin condensación. |
Valoraciones
No hay valoraciones aún.